Product Code: DUROHT15
SELL TILE RITE PRODUCTS
If you are retailer or wholesaler and would like to stock Tile Rite or Plasplugs products, then please fill in and fax or email back this form CLICK HERE
Product Code: Variants
Product Code: FIC467
Product Code: FEC466
Product Code: BST130
| ORDER CODE | LENGTH | WIDTH | DESCRIPTION | BARCODE | ROLLS PER PALLET |
|---|---|---|---|---|---|
| DUROHT15 | 15M | 1M | 15M DURA ORIGINAL HEAT MAT | 5019788010021 | 6 |
| Material: | Polypropylene Dimpled Sheet & Fleece | Crack Bridging: | 2mm |
| Mat Height: | 5mm | Heating Cable: | 2-5mm |
| Roll Width: | 100cm | Adhesive Tensile Strength: | 0.2 N/mm2 |
| Roll Length: | 15m | Robinson Test: | Extra-heavy |
| Mat Colour: | Dimpled Sheet = Yellow, Fleece = White | Storage: | Upright with original packaging, in a dry place protected from sunlight. |
Q. Is Decoup Original a copy of Durabase CI++ Matting?
A. No, Tile Rite have sold this same matting that is manufactured at ISOLA in Norway since 2008. ISOLA have been manufacturing this same mat for over 15 years. Decoup Original, is is the same product with a new label and name DECOUP ORIGINAL.
Q. Can you use underfloor heating with DECOUP ORIGINAL Matting?
A. Yes, when installing underfloor heating with DECOUP ORIGINAL matting, it is recommended that you install the heating underneath the matting. The layering should be as follows: Concrete Sub Floor, Screed, Underfloor heating, DECOUP ORIGINAL Matting, Tiles. The DECOUP ORIGINAL Matting is manufactured to give good thermal conductivity and will evenly distribute the heat, DECOUP ORIGINAL ensures that movements in the screed caused by thermal fluctuations are balanced out reliably for years to come.
Q. What is DECOUP ORIGINAL For?
A. DECOUP ORIGINAL is for sheer stress protection. Sheer stresses develop whenever surfaces move. Movements can occur due to drying, shrinkage or thermal fluctuations in the screed, which can be caused by underfloor heating or problematic subfloors, for example. With the DECOUP ORIGINAL matting used as a stress alleviating intermediate layer, damaging shear stresses are absorbed by the special triple-layer mat structure, keeping tiled surfaces free of cracks.
Q. Is DECOUP ORIGINAL Waterproof?
A. In combination with tiling, DECOUP ORIGINAL matting acts as an additional seal that prevents water from seeping through. Associated accessories - internal and external corners, sealing collars and joint tape should be used for connecting and sealing butt joints.
Q. How do I lay DECOUP ORIGINAL?
A. Fix the DECOUP ORIGINAL matting (fleece layer at the bottom) to the subfloor using a powdered flexible tile adhesive (applied with a 4mm square notched trowel). Tape over the joints with sealing tape. Then press the flexible tile adhesive through the mesh into the depressions and spread across the entire area. Finally, scrape off the excess with a notched trowel and lay the tiles on the mat.